T M 9 - 2 3 2 0 - 2 7 9 - 3 4 - 1
(13) Install sensor
Electrical System
plate (26) with two
screws (27) and lockwashers (28).
N O T E
The three overload switches are installed
the same way.
Maintenance Instructions (Cont)
(14) Install mast overload switch (29) in
mounting flange (30).
(15) Install mounting flange (30) on mast (31)
with four screws (32).
N O T E
The four overload switches are installed
the same way.
(16) Install overload switch (33) on mounting
bracket (34) with nut (35).
N O T E
Settings are made the same way for all
four overload switches.
(17)
(18)
Tighten nut (36) and jamnut (37) until
one screw thread is below surface of
nut (36).
Adjust nut (35) and jamnut (38) until
overload switch (33) is 1/16 in.
(1.59 mm) from switch sensing
plate (39).
6-70.5
