T M 9 - 2 3 2 0 - 2 7 9 - 3 4 - 1
l
l
(7) Remove four screws (18), lockwashers (19), washers (20), and cover (21) from box (22).
N O T E
Wires for seven overload
switches are removed the
same way.
Remove wire clips and ties as
necessary.
(8) Remove connector (23),
spacer (24), and grommet (25)
from fitting (26).
N O T E
Tag and mark wires before
removing.
(9) Loosen three screws (27) on
terminal board (28) and
remove wires (29).
(10) Remove connector (23),
spacer (24), and grommet (25)
from wire harness (30).
(11) Remove four nuts (31),
lockwashers (32), clamp (33),
and box (22).
6-70.2
