TM 9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
23-4.1 FILTER-SEPARATOR REMOVAL/REPAIR/INSTALLATION (M978) (MODEL B)
(CONT).
(6)
Install locator (8) and two spacers (9) on
two retainers (10) with two screws (11),
lockwashers (12), washers (13),
lockwashers (14), and nuts (15).
(7)
(8)
Install two nuts (16) on two rods (17).
Install rods (17) in filter-separator
tank (6) and tighten nuts (16).
CAUTION
Do not handle separator canister or
coalescer element with bare hands. Any
contaminants, including dirt or oil
hands, will deactivate elements.
from
(9)
(10)
Install two separator canisters (18) in
filter-separator tank (6) with two seal
nuts (19). Tighten seal nuts to 5 lb-ft
(6.78 N•m).
Install six coalescer elements (20) in
filter-separator tank (6). Tighten
coalescer element to 30 lb-ft
(40.68 N•m).
23-34
Change 3
