TM9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
23-4. FILTER-SEPARATOR REMOVAL/REPAIR/INSTALLATION (M978) (MODEL A)
(CONT).
(12)
(13)
(14)
(15)
(16)
(17)
Remove two nuts (26),
screws (27), and coupling
halves (28). Slide coupling
gasket (29) on pipe (30).
Remove two nuts (31),
screws (32), and coupling
halves (33). Slide coupling
gasket (34) on pipe (35).
Soldier A removes three locknuts
(36) while Soldier B holds and
removes screws (37) from
filter-separator (38) and three
brackets (39).
Soldier A guides
filter-separator (38) from top
access opening of pump
module while Soldier B
operates suitable lifting
device.
Remove three locknuts (40),
screws (41), brackets (42),
and brackets (39) from
grating (43).
Remove two coupling
gaskets (29 and 34) from
pipes (30 and 35).
23-12
Change 3
