TM 9-2320-279-20-3
Change 4
23-7
Filter-Separator Maintenance Instructions (Cont)
CAUTION
Do not tear or otherwise damage
preformed packing during installation of
cover. If packing is damaged, cover will
leak.
(9)
Using suitable lifting device, position
cover (16) on filter-separator tank (5).
(10)
Push ten tee screws (17) in slots on
edge of cover (16) so washers (18) and
nuts (19) are on top of cover.
(11)
Deleted.
(12)
Deleted.
(13)
Deleted.
(14)
Tighten 10 nuts (19) to 105 lb-ft
(142 NSm).
d. Follow-on Maintenance.
(1)
Install VT VENTURI assembly
(para 25-36).
(2)
Recirculate fuel (TM 9-2320-279-10).
(3)
Check filter-separator for leaks.
(4)
Close pump module top access door
(TM 9-2320-279-10).
END OF TASK
