TM 9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
CAUTION
Do not tear or otherwise damage preformed packing during installation of cover. If packing
is damaged, cover will leak.
(6)
Using suitable lifting device, position cover (8) on filter-separator tank (3).
(7)
Push six eyebolts (9) in slots on edge of cover (8) so washers (10) and nuts (11) are on top of
(8)
Position four eyebolts (12) in slots on edge of cover (8).
(9)
position four brackets (13) on four eyebolts (12) and tighten two screws (14) and nuts (15)
(10)
Install, but do not tighten,
four washers (16) and nuts (17).
(11)
Tighten 10 nuts (11 and 17) to 75 lb-ft (102 N•m).
c. Follow-on Maintenance.
(1)
Install VT VENTURI assembly (para 25-36).
(2)
Recirculate fuel (TM 9-2320-279-10).
(3)
Check filter-separator for leaks.
(4)
Close pump module top access door (TM 9-2320-279-10).
END OF TASK
Change 3
23-6.1
