Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
TM 9-2320-279-20-2
(2)
Turn nut (3) clockwise to loosen
knob (4).
(3) Remove knob (4).
(4)
Turn nut (3) counterclockwise and
remove.
b. Installation.
(1)
Install nut (1) on lever (2).
(2)
Install knob (3) on lever (2).
NOTE
All crane controls are installed the same way.
a. Removal.
NOTE
All crane controls are removed the
same way.
(1)
Remove control lever (1) from
control (2).
(3)
Install lever (2) in control (4).
WARNING
Make sure directions on knob are right side up
before tightening nut. Injury to personnel could
result from operation of crane in wrong
direction.
(4)
Tighten nut (1) against knob (3).
c.
Follow-on Maintenance. None.
END OF TASK
Change 2
17-130.1
