TM 9-2320-279-20-2
17-84
Change 4
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-71.1.
CRANE HOOK, BLOCK, HOOK AND CLEVIS REMOVAL/REPAIR/
INSTALLATION (M984E1) (CONT).
NOTE
·
There are two models of hook and latch that may be installed on crane.
·
Model A does not have cotter pin on end of hook.
·
Model B does have cotter pin on end of hook.
·
Note position of cable in sheaves before removing.
(4)
Remove cable (8) from hook block (9).
b. Disassembly.
(1)
Remove screw (1), lockwasher (2), washer (3), and pin (4) from hook block (5).
(2)
Remove spacer (6) from pin (4).
