TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-11.2. HEAVY-DUTY WINCH CABLE TENSlONER REMOVAL/REPAIR/INSTALLATION
(M984E1) (CONT).
d. Assembly.
NOTE
Install spacer and snap ring so sharp edge
of each faces outward on shaft.
(1) Install washer (1), sleeve (2), roller (3),
sleeve (2), washer (1), spacer (5), and
snap ring (4) on tensioner (6).
(2) Repeat step (1) for other side.
(3)
(4)
(5)
Install sleeve (7) and rod (8) in
tensioner (6).
Install spring (9), spacer (10),
bracket (11), washer (12), and
locknut (13).
Repeat step (4) for other side.
(6) Install spacer (14), washer (15), screw (16),
spacer (14), washer (15), and nut (17) in
tensioner (6).
17-62
