(8)
TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
Remove 16 screws (14),
lockwashers (15), and right
and left mounting
brackets (5 and 16).
b. Installation.
(1)
(2)
Support self-recovery
winch (1) with suitable
lifting device.
Install right and left
mounting brackets (2 and 3)
with 16 screws (4) and
lockwashers (5).
NOTE
Do step (3) for M984 and M983
(without crane) only.
l
l
(3) Soldier A and Soldier B
position self-recovery
winch (1) and two
brackets (6) against vehicle
so holes align, and install
eight screws (7).
NOTE
Do step (4) for models
M977, M978, M983 (with
crane), M984E1, and M985.
If removed, eight screws on
M984E1 only should be installed
from inside of frame.
(4)
(5)
(6)
Soldier A and Soldier B position self-recovery winch (1) against vehicle so holes align, and install
eight screws (7).
Soldier A holds each of eight screws (7) while Soldier B installs eight nuts (8).
Soldier A installs and holds four screws (9) while Soldier B installs four nuts (10).
17-55
