TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-10. SELF-RECOVERY WINCH AND BRACKETS REMOVAL/INSTALLATION (CONT).
a. Removal.
(1)
(2)
(3)
(4)
Remove two nuts (1),
lockwashers (2),
washers (3), and screws
from winch mounting
bracket (5).
Move two hoses (6) and
bracket (7) aside.
Support self-recovery
winch (8) with suitable
lifting device.
Soldier A removes four
screws (9) while Soldier
holds and removes four
nuts (10).
NOTE
ON M984E1, the eight screws
are installed so that the nut is
(4)
B
on the outside of frame. These
screws do not need to be
removed unless replacement is
necessary.
(5) Soldier A removes eight
screws (11) while Soldier B
holds and removes eight
nuts (12).
NOTE
Do step (6) for M984 and M983
(without crane) only.
(6) Soldier A and Soldier B
remove self-recovery
winch (8) and two
brackets (13).
NOTE
Do step (7) for models M977,
M978, M983 (with crane),
M984E1, and M985.
(7) Soldier A and Soldier B remove self-recovery winch (8).
17-54
