TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
NOTE
Interconnect and tether must be just free to rotate after nut is tightened.
Interconnect must be positioned 45° frontward and upward.
Tether must be positioned 45° rearward and downward.
(5)
Install washer (19), interconnect (20), washer (21), tether (22), and washer (23) with screw (24)
and locknut (25) to seat (13). Tighten to 40 lb-ft (54 N°m) and snap boot (26) shut.
(6)
Install other end of tether (22) with washer (27) and screw (28) to cab (5).
(7)
Perform steps (1) thru (6) for drivers side seat.
Change 2
16-130.5