TM 9-2320-279-20-2
16-118.2
Change 5
16-26.1. SEAT (AIR-RIDE) REMOVAL/INSTALLATION (CONT).
b. Disassembly.
(1) Remove four screws (1) and two loops
(2) from seat (3).
(2) Remove screw (4), washer (5), retractor
(6), washer (7), and seatbelt (8) from
seat (3).
WARNING
Pull out ride control valve knob to release
pressure in air-ride system. Failure to
comply may result in injury to personnel.
(3) Remove airhose (9) from ride control
valve (10).
(4) Loosen screw (11) and remove knob (12)
from ride control valve (10).
(6) Remove nut (13), lockwasher (14), and
ride control valve (10) from seat frame
(15).
(7) Remove four locknuts (16), two stop
brackets (17), four spacers (18), stop
bracket (19), and tracks (20) from seat
frame (15).
NOTE
There are two shock absorbers on each
seat. Both are removed the same way.
(8) Remove nut (21), lockwasher (22), and
screw (23) from shock absorber (24).
(9) Remove nut (25), lockwasher (26), and
screw (27) and shock absorber (24) from
seat frame (15).
