TM 9-2320-279-20-2
Change 5 16-118.1
Supplies
Compound, Sealing, Pipe Thread
(Item 18, Appendix C)
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-on Maintenance
c. Assembly
INITIAL SETUP
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
TM 9-2320-279-20 Drain Air System.
References
None
Special Tools
None
16-26.1. SEAT (AIR-RIDE) REMOVAL/INSTALLATION.
Models
All
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
a. Removal.
NOTE
Both seats are removed the same way,
left seat shown.
Remove cable ties as required.
Cap and plug disconnected airhoses.
(1)
Move seat (1) completely forward.
(2)
Disconnect airhose (2) from ride control
valve (3).
(3) Remove cap (4), screw (5), lockwasher
(6), upper retractable tether (7), and
retainer (8) from seat (1).
(4) Remove locknut (9), washer (10), seat
belt (11), two washers (12), two tethers
(13 and 14), washer (15), screw (16),
and washer (17) from each side of seat
(1).
(5) Remove four locknuts (18) and washers
(19) from studs (20).
(6) Soldier A and Soldier B lift seat (1) off
seat support (21).
