TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-5. IGNITION SWITCH BRACKET REMOVAL/INSTALLATION (CONT).
a. Removal.
(1) Remove six screws (1) and move instrument panel (2) toward steering wheel.
(2) Soldier A removes two screws (3) and washers (4) while Soldier B removes two nuts (5) and
lockwashers (6).
NOTE
Tag and mark wires before
disconnecting.
(3) Remove nut (7),
(4)
(5)
lockwasher (8), five ground
wires (9), clip (10),
lockwasher (11),
washer (12), and screw (13).
Remove nut (14),
lockwasher (15), screw (16),
and washer (17).
Remove ignition switch
bracket (18).
16-28
