TM 9-2320-279-20-2
Change 4
16-23
Cab and Body Maintenance Instructions (Cont)
(3)
Install cab step (5) with four washers
(22), lockwashers (21), and screws (20).
(4)
Install step support (17) onto cab step
(5) with three screws (19) and locknuts
(18).
(5)
Install step link (12) onto step support
(17) with screw (14), washer (15), spacer
(16), and locknut (13).
(6) Install lower step (7) onto step link (12)
with screw (9), washer (10), spacer (11),
and locknut (8).
(7)
Install chain (4) to lower step (7) with
rapid link (6).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(8)
Lightly apply adhesive to threads of
screw (2).
(9)
Install chain (4) onto cab step (5) with
screw (2), five washers (3), and locknut
(1).
c. Follow-on Maintenance. Install
clearance light assembly (para 7-66).
END OF TASK
