TM 9-2320-279-20-2
(1)
(2)
Cab and Body Maintenance Instructions (Cont)
b. Installation.
Install ignition switch
bracket (1), screw (2),
washer (3), lockwasher (4),
and nut (5).
Install screw (6),
washer (7), lockwasher (8),
clip (9), five ground
wires (10), lockwasher (11),
and nut (12).
Install two lockwashers (15) and nuts (16). -
Soldier A tightens two screws (13) while Soldier B holds two nuts (16).
Install instrument panel (17) with six screws (18).
(3) Install two screws (13) and washers (14) in ignition switch bracket (1).
(4)
(5)
(6)
c. Follow-on Maintenance.
(1) Install engine stop switch (para 7-38).
(2) Install engine start switch (para 7-63).
(3) Install optic ribbon in rear of ignition switch bracket (para 7-56).
END OF TASK
16-29
