TM 9-2320-279-20-2
Change 4
16-22.1
Cab and Body Maintenance Instructions (Cont)
Supplies
Adhesive, thread locking, Item 4.3,
Appendix C
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Para 7-66
Step clearance light
assembly removed.
References
None
Special Tools
None
16-3. STEP REMOVAL/INSTALLATION.
Models
All
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
a. Removal.
NOTE
·
There are two models of steps than
may be removed from the vehicle
·
Model A does not have a chain or
step link.
·
Model B does have a chain and
step link.
·
Perform steps (1) and (2) for Model
A.
·
Perform steps (3) through (9) for
Model B.
Perform steps (1) and (2) for Model A.
Perform steps (3) through (9) for Model
(1)
Remove four nuts (1) and
screws (2). Remove flexible
step (3) from step (4).
(2)
Remove four screws (5),
lockwashers (6), and
washers (7) from step (4).
Remove step from cab (8).
