TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-2. DOOR REMOVAL/REPAIR/INSTALLATION (CONT).
(30) Operate inside door latch (31) to make sure cable (17) unlatches door lock (15).
(31) If needed, adjust cable (17) as follows:
(a) Loosen jamnut (23) and remove spring (46) from end of outer link rod (43).
(b) Remove cable end fitting (24) from outer link rod (43).
(c) Turn cable end fitting (24) clockwise on cable (17) to shorten, counterclockwise to make cable
longer.
(d) Install cable end fitting (24) on outer link rod (43).
(e) Install spring (46).
(f) Tighten jamnut (23).
(32) Operate inside and outside door latches (31 and 35) to make sure door lock (15) works.
16-18
