TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
13-3. STEERING LINKAGE AND UNIVERSAL JOINT
REMOVAL/REPAIR/INSTALLATION/ADJUSTMENT (CONT).
NOTE
Check to see that wheels are
straight before performing
step (7).
( 7 )
( 8 )
(9)
Install yoke (13) on shaft (6)
with screw (14) and
nut (13). Tighten to 35 to
40 lb-ft (48 to 54 N•m).
Install yoke (16) on steering
gear (17) with screw (18)
and nut (19). Tighten to 35
to 40 lb-ft (48 to 54 N•m).
Lubricate steering column
linkage (LO 9-2320-279-12).
e . A d j u s t m e n t .
(1) Push down and turn horn button (1)
counterclockwise 1:3 of a turn.
(2) Remove horn button (1), spring plate (2),
and spring (3) from steering wheel (4).
13-10
