TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
d. Installation.
(1)
Install ball (1) and retainers (2).
NOTE
Some vehicles have three nuts,
lockwashers, and screws. Others have
three carriage screws and flanged nuts.
(2)
Soldier A installs three screws (3) while
Soldier B holds lockwashers (4) and
nuts (5).
(3)
Install shaft (6) in ball socket (7).
(4) Install key (8) in go-degree gearbox shaft (9).
(5)
Aline slot in yoke (10) with key (8).
(6)
Install yoke (10) on go-degree gearbox shaft (9) with screw (11) and nut (12). Tighten to 35
to 40 lb-ft (48 to 54 N•m).
Change 2
13-9
