TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
d . A s s e m b l y .
NOTE
Right and left side drag link ends
are installed the same way.
(2) Install clamp (1) on drag link (2)
with screw (3) and nut (4). Do
not tighten nut.
(2) Coat threads of drag link end (5) with antiseize compound.
(3) Install drag link end (5) in drag link (2).
(4) Tighten nut (4).
(5) Install boot (6) on drag link end (5).
e. Adjustment.
(1) Loosen clamps (1).
(2) Adjust socket ends of front
drag link (2). Do not tighten
two clamps at this time.
f . I n s t a l l a t i o n .
(2) Spread slot in pitman arm (1) and install
one end of drag link (2). Install
screw (3), lockwasher (4), and nut (5)
and tighten to 70 to 80 lb-ft (95 to
108 N•m).
13-15
