TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-37. AIR GOVERNOR REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Shut off engine.
None
TM 9-2320-279-10 Air system drained.
Supplies
Special Environmental Conditions
Compound, sealing, pipe thread,
None
Item 18, Appendix C
Tags, identification, Item 48, Appendix C
General Safety Instructions
Personnel Required
Allow engine, muffler, and connecting parts
MOS 63S, Heavy wheel vehicle mechanic
to cool before removing governor.
a.
Removal.
NOTE
Tag and mark air lines before removal.
(1)
Remove four air lines (1) from air governor (2).
NOTE
There are two kinds of air governors.
Model A has the adjusting screw uncovered on the
bottom. Model B has a plastic cover threaded on the adjusting screw. Both are removed the
(2)
Remove bottom mounting screw (3) and lockwasher (4) from air governor (2).
(3)
Remove straight fitting (5).
(4)
Remove top mounting bolt (6) and lockwasher (7).
(5)
Remove air governor (2) from air compressor (8).
11-164
Change 2
