TM 5-5420-234-14&P
4-77. HAND-HELD SPOTLIGHT HARNESS REPLACEMENT (MODEL A ONLY)
(continued).
NOTE
Tag and mark wires prior to removal.
Note position of rubber grommet prior to removal.
(5) Remove white wire no. 5 (10) from terminal no. 5 (11) and black wire no. 16 (12) from terminal no. 16
(13).
(6) Remove nut (14), plastic insert (15) and rubber grommet (16) from back of junction box (17).
(7) Remove hand-held spotlight harness (18) from junction box (17).
14
18
15
16
11
17
10
13
12
OTHER WIRE HARNESSES
REMOVED FOR CLARITY
(8) Remove nut (14), plastic insert (15), and rubber grommet (16) from hand-held spotlight harness (18).
b. Installation.
(1) Install rubber grommet (16), plastic insert (15), and nut (14) on hand-held spotlight harness (18).
(2) Position hand-held spotlight harness (18) in junction box (17).
NOTE
Ensure rubber grommet is installed as noted during removal.
(3) Install rubber grommet (16), plastic insert (15) and nut (14) in back of junction box (17).
(4) Install black wire no. 16 (12) on terminal no. 16 (13) and white wire no. 5 (10) on terminal no. 5 (11).
Change 1
4-6
4-611
