TM 5-5420-234-14&P
4-49. EXHAUST EXTENSION REPLACEMENT (MODEL A ONLY) (continued).
NOTE
Ensure top clamp is installed as noted prior to removal.
(4) With the help of an assistant, install shield (6) on three clamps (7) with nine new lockwashers (5) and
screws (4).
(5) Install angle strap (10) on center clamp (7) with screw (13) and nut (12).
(7) Secure top and bottom clamp (7) with screw (15) and nut (14).
(8) Install rain cap (2) in tube (3) and secure with nut (1).
2
6
3
1
5
4
12
7
13
11
10
8
9
c. Follow-on Maintenance:
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
