TM 5-5420-234-14&P
4-47. LADDER BRACKETS REPLACEMENT (MODEL A ONLY) (continued).
b. Installation.
WARNING
Adhesive causes immediate bonding on contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective goggles and use in a well-ventilated area.
If adhesive gets in your eyes, try to keep them open; flush them with water for 15
minutes and get immediate medical attention.
NOTE
There are two ladder brackets. Both brackets are installed the same way.
Perform Step 1 only if rubber pads were removed.
(1) Apply adhesive to two rubber pads (5) and install on vehicle (4).
(2) Install ladder bracket (3) on vehicle (4) with two screws (2) and new locknuts (1).
3
1
2
5
4
5
SPARE TIRE REMOVED FOR CLARITY
c. Follow-on Maintenance:
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
4-51517
4- 6.1