TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
17. BAP WINCH DOES NOT OPERATE (MODEL B ONLY) (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply with
this caution may result in damage
to test equipment or electrical sys-
tem.
NOTE
A reading of infinity indicates an
open circuit.
(1) Set multimeter to ohms position.
(2) Connect multimeter between position
"1" and position "2" on winch in and
winch out valve solenoid. Check
multimeter for continuity.
POSITION 1
POSITION 1
POSITION 2
POSITION 2
WINCH OUT VALVE WINCH IN VALVE
ANDSOLENOID
ANDSOLENOID
4-49399
4- -90.
3 5.4
Change 1
