TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
17. BAP WINCH DOES NOT OPERATE (MODEL B ONLY) (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply with
this caution may result in damage
to test equipment or electrical sys-
tem.
(1) Set multimeter to ohms position.
NOTE
WINCH IN VALVE
A reading of infinity indicates an
ANDSOLENOID
open circuit.
(2) Connect multimeter between (J3),
position "6", and winch in solenoid
connector, position "1". Check
multimeter for continuity.
POSITION 2
POSITION 1
(3) Connect multimeter between (J3),
position "36", and winch in solenoid
connector, position "2". Check
multimeter for continuity.
J3
POSITION
36
POSITION 6
4-4-90.7
3 39
Change 1
