TM 5-5420-234-14&P
2-11. LOADING BRIDGE BAY FROM THE GROUND (continued).
g. Secure winch frame to LHS hook arm. Make sure two
winch frame locking levers (4) are in the down position.
If locking levers (4) are not down:
(1)
Remove lockpin (5) from each upper locking
lever (4).
(2)
Swing each locking lever (4) to the down
position.
4
5
(3)
Insert lockpin (5) into each locking lever (4).
WARNING
Keep hands and fingers clear of front pin lock assemblies when in the auto engaged
position. Failure to follow this warning could result in injury to personnel.
h. Secure curb-side and road-side front pin lock assemblies (6) in the auto engage position. See Table 2-2
(p. 2-37) for proper position of all locks.
i.
Pull back front pin lock assemblies (6) until latch lever pin (7) rests in base of verticle slot (8).
8
6
7
2-49
