Special Purpose Kit Installation lnstructions (Cont)
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open tire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Apply pipe thread sealing compound to threads of nipple (44) and install nipple and tee (45) in
engine block (43).
Apply pipe thread sealing compound to threads of adapter (46) and install in tee (45).
Install 112 in. (2845 mm) hose (47) on adapter (46) with clamp (48).
Apply pipe thread sealing compound to threads of adapter (49), in hose (40), and install
adapter in tee (45).
Remove and discard plug (50) from thermostat housing (51).
Apply pipe thread sealing compound to threads of adapter (52) and install in thermostat
Install 92 in. (2337 mm) hose (53) on adapter (52) with clamp (54).
Route hoses (47) and (53) towards front of vehicle using plastic cable ties to secure hoses.