TM 9-2320-279-34-3
23-14
Change 5
Special Purpose Kit Installation Instructions (Cont)
23-2. ARCTIC HEATER KIT INITIAL INSTALLATION (CONT).
NOTE
Quick release valve is mounted to
crossmember only on Model M984E1.
(44)
Remove two nuts (88), screws (89), and
quick release valve (90) from
crossmember (91).
(45)
Install bracket (92) and quick release
valve (90) with two screws (89) and nuts (88)
(46)
Install clamp (93) on bracket (92) with
screw (94) and nut (95).
(47)
Install clamp (96) on bracket (82) with
screw (97), spacer (98), and nut (99).
(48)
Install water jacket (100) as follows:
(a)
Position water jacket (100) in two
clamps (93) and (96).
(b)
Install screw (101) in clamp (96).
Do not tighten screw.
(c)
Install safety chain (102) on a
screw (101) with washer (103) and
nut (104).
(d)
Install hose (86) on water jacket (100)
with clamp (105).
(e)
Install exhaust pipe (37) on water
jacket (100) with clamp (106).