Cab and Body Maintenance Instructions (Cont)
Spring is tightly wound and must be tied together to
contain spring coils. If spring is not tied together
when removed, spring will unwind with force
causing injury to personnel.
(12) Tie spring (24) together and remove spring from
back disk assembly (19).
Separate coated cable (25)
from back disk
Remove screw (26) and
coated cable (25).
Remove cable terminal (27)
from coated cable (25).
Remove setscrew (28) from
hub collar (29).
Wear safety glasses while removing retaining rings to
protect eyes from possible injury or blindness.
Number of shim spacers may vary from reel to reel.
Remove retaining ring (30) and shim spacers (31).
Matchmark and press out hub collar (29) and hub
Remove spacer (33).
Press out roller bearing (34) through back disk
Remove key (35) from hub shaft (32).