Cab and Body Maintenance Instructions (Cont)
15-6. STATIC GROUND REEL REPAIR (M978) (CONT).
(13) Route other end of coated
cable (2) through hole in
back disk assembly (8).
(14) Install cable terminal (20)
on coated cable (2).
(15) Install cable terminal (20)
on back disk assembly (8)
with screw (21).
Do not untie spring until spring is securely
installed in back disk assembly. Spring is tightly
wound. If spring is released before it is
installed, spring will unwind causing injury to
Position spring (22) in back disk assembly (8)
so hooked ends of spring are installed in
cut-outs on reel drum (11) and hub collar (15).
Remove ties from spring (22).
Install roller bearing (23) in ratchet (24).
Aline ratchet (24) with matchmarks on front disk
assembly (25) and install with six rivets (26).