Suspension Maintenance Instructions (Cont)
14-5. EQUALIZER BEAM ASSEMBLY (FRONT TANDEM) REMOVAL/REPAIR/iNSTALLATION
(1) Lubricate two beam end bushings (1), beam
center bushing (2), and three bores in
equalizer beam (3) with grease.
Use end bushing installer and press two
beam end bushings (1) into equalizer
beam (3) so bushings are centered in beam.
Use center bushing installer and press
beam center bushing (2) into equalizer
beam (3) so that closed end extends
2 1/2 in. (63.5 mm) from straight side of
Coat both ends of beam center bushing (2)
with rust preventive.
(1) Apply rust preventive to both ends of
center cross tube (1).
(2) Soldier A and Soldier B install two
equalizer beams (2) on center cross