Frame Maintenance Instructions (Cont)
(1) Install one grease fitting (1) in each side
of plate (2).
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
Apply antiseize compound to lockpin
holes in plate (2).
Position lockjaws (3) in plate (2) with large recessed diameter facing plate.
Soldier A and Soldier B install lockpins (4) through plate (2) and lock jaws (3) from top surface
Install two cotter pins (5) in Iockpins (4).
Place 2-in. (51 mm) diameter locktester
plug (6) in lockjaws (3).
Install yoke (7) in plate (2) around
lockjaws (3). Ends of yoke must come to
ends of lockjaws.
Remove locktester plug (6).