TM 9-2320-279-34-1
6-14.4
Change 5
Electrical System Maintenance Instructions (Cont)
6-2.1. 24-VOLT ALTERNATOR REPAIR (CONT).
NOTE
Tag and mark wires before removal.
(22)
Remove six rectifier wires (50) from
three terminals (28).
CAUTION
Do not remove lower bushing from positive
rectifier. Failure to comply may damage
bushing.
(23)
Remove lower mounting screw (51),
lockwasher (52), washer (53), plastic
washer (54), positive rectifier (44) with
bushing (55), and bushing (56) from slip
ring end housing (25).
(24)
Remove screw (57) and wire (58) from
negative rectifier (45).
(25)
Remove nut (59), negative terminal
screw (60), two insulation bushings (61),
regulator holder (3), gasket (62), wire
(47), and wire (58) from negative
rectifier (45) and slip ring end housing
(25).
(26)
Remove three nuts (63) and terminal
studs (64) from regulator holder (3).