TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-6.1
REAR BRAKE CAMSHAFT AND AUTOMATIC SLACK ADJUSTER
REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Adjustment
b. Installation
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Compound, antiseize, Item 10, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10
Shut off engine.
Para 12-4
Rear brakedrum removed.
Para 12-5
Brakedrum and wheel hub
removed (M984E1).
Para 11-4
Rear brakeshoes removed.
Special Environmental Conditions
None
NOTE
Remove rear brake chambers only when re-
moving camshaft brackets.
References
None
General Safety Instructions
Wheels chocked.
Level of Maintenance
General Support
a.
Removal.
(1)
Remove cotter pin (1) and clevis pin (2).
(2)
Remove nut (3) from screw (4) of control
arm (5).
Change 2
11-18.1