TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-6.1
REAR BRAKE CAMSHAFT AND AUTOMATIC
SLACK ADJUSTER REMOVAL/INSTALLATION (CONT).
NOTE
Number of shims may vary.
(3)
Remove retaining ring (6) and shims (7) from camshaft assembly (8).
(4)
Remove slack adjuster (9) and washer (10).
(5)
Remove camshaft (11) and spacer (12).
(6)
Remove nut (13), lockwasher (14), and bracket (15).
NOTE
Step (7) is for all vehicles except M984E1.
(7)
Remove four screws (16), washers (17),
lockwashers (18), nuts (19), and camshaft
bracket (20).
(8)
Remove grease fitting (21).
(9)
Remove oil seals (22) and bushings (23)
from two camshaft brackets (20).
NOTE
Step (10) is for M984E1 vehicles only.
(10)
Remove two screws (24), two screws (25),
washers (26), brackets (27),
lockwashers (28), and nuts (29).
11-18.2
Change 2