NORMAL TRANSFER OF THE BAP TO TRAILER (continued).
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
T urn LHS MODE SELECT switch (19) to HOOK ARM only (position 2).
u. Move joystick (21) to LOAD until front of the BAP is raised approximately 12 to 18 inches (30 to 46 cm)
above trailer deck height.
T urn LHS MODE SELECT switch (19) to MAIN FRAME ONL
Y (position 3).