2-20. NORMAL TRANSFER OF THE BAP TO TRAILER (continued).
Make sure trailer drawbar is down against the ground during transfer operations
or damage to equipment may result.
To prevent damage to equipment, make sure air lines and cables are properly
stowed (TM 9-2330-385-14).
Both trailer bumper points must be under truck bump plate, and at least one
trailer bumper point must contact bump plate. Trailer bumper point not
contacting Transporter bumper stop cannot exceed 0.5 inch (12.7 mm) or the
BAP will miss main rail guides and damage to equipment may result.
Back up Transporter so trailer bumper points (17) are under flange and contact bump plate (18).
Set parking brake, and put transmission in neutral.