(5)
(6)
TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
Remove six screws (13), lockwashers (14), and support (5)
Repeat step (5) for other side.
d. Engine Installation.
WARNING
Keep out from under heavy parts. Falling parts may cause
serious injury or death.
(1) Install support (1) with six lockwashers (2) and screws (3)
to engine (4). Do not tighten.
(2) Repeat step (1) for other side.
(3) Aline and install engine (4) in lower container (5).
(4) Install two washers (6), screws (7), lockwashers (8), and nuts (9) in inner frame (10).
(5) Install four screws (11), washers (12), lockwashers (13), and nuts (14).
(6) Repeat step (5) for other side.
(7) Tighten twelve screws (3) to 1000 lb-in. (112 N m).
(8) Tighten nuts (9 and 14) to 440 lb-in (48 N m).
23-61
