TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
(8)
Remove two locknuts (10), screws (11), and rubber hood hooks (7).
(9)
Install two brackets (12) with two screws (13), lockwashers (14), and nuts (15).
(10)
Install two rubber hood hooks (7) with two screws (11) and locknuts (10).
(11)
Install two batteries (16).
(12)
Install four screws (17) and washers (18).
(13)
Install two holddowns (19) on four screws (17) with four washers (20) and locknuts (21).
(14)
Install jumper cable (22) and tighten two nuts (23).
Change 3
23-5
