TM 9-2320-279-34-3
23-4
Change 5
Special Purpose Kit Installation Instructions (Cont)
23-2. ARCTIC HEATER KIT INITIAL INSTALLATION (CONT).
b. Initial Installation.
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
·
Apply electrical sealant to exposed
wire connectors after installing
connectors.
·
Install plastic cable ties as required.
(1)
Remove alternator belts and fan belts
(TM 9-2320-279-20).
(2)
Install arctic kit alternator belts and fan
belts (TM 9-2320-279-20).
(3)
Remove battery box (TM 9-2320-279-20).
(4)
Install arctic kit battery box
(TM 9-2320-279-20).
(5)
Install battery box (1) with six
screws (2), washers (3), and locknuts (4).
(6)
Remove locknut (5), screw (6), and
rubber hood hook (7) from bracket (8).
(7)
Remove screw (9) and install bracket (8)
with screw.
