TM 9-2320-279-34-3
Change 4
22-87
M978 Tanker Maintenance Procedures Instructions (Cont)
(21)
Apply pipe thread sealing compound to
plug (35) and install in valve body (17).
(22)
Install plug (36) and preformed packing (37).
(23)
Install screen (38) with four retainers (40),
lockwashers (41), and screws (42).
(24)
Install two rivets (43).
d. Follow-on Maintenance. None.
END OF TASK
Supplies
Oil, lubricating, Item 47, Appendix C
Solvent, dry cleaning, Item 57, Appendix C
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
V11 flow regulating valve on
clean work surface.
References
None
Special Tools
None
22-18. V11 FLOW REGULATING VALVE REPAIR.
Models
M978
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
a. Disassembly.
CAUTION
Valve must be in open position for removal of valve parts
and to prevent equipment damage.
NOTE
There are two models of V11 flow regulating valve.
Disassembly is the same for both.
(1)
Set handle (1) to OPEN position.
