TM 9-2320-279-34-3
Change 4
22-79
M978 Tanker Maintenance Procedures Instructions (Cont)
(7)
Install gasket (13), flange (14), screws (15),
and locknuts (16) in valve housing (2).
d. Follow-on Maintenance. None.
END OF TASK
Supplies
Oil, lubricating, Item 47, Appendix C
Solvent, dry cleaning, Item 57, Appendix C
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
V7 or V8 reel valve on clean
work surface.
References
None
Special Tools
None
22-16. V7/V8 REEL VALVE REPAIR.
Models
M978
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
a. Disassembly.
CAUTION
Valve must be in open position for removal
of valve parts and to prevent equipment
damage.
NOTE
V7 Models A and B and V8 Models A and B
reel valves are disassembled the same way.
(1)
Set handle (1) to OPEN position.
(2)
Remove screw (2), washer (3), and
handle (1) from stem (4).
