TM 9-2320-279-34-3
M978 Tanker Maintenance Procedures Instructions (Cont)
22-6. FLOWMETER REGISTER REMOVAL/INSTALLATION (CONT).
a. Removal.
(1) Remove safety wire (1) and two front screws (2).
(2) Remove two rear screws (3).
(3) Remove flowmeter register (4) from flowmeter (5).
NOTE
Top gear may come off or stay with gear plate.
(4) Mark position of gear plate (6). Remove two screws (7) and gear plate from flowmeter
register (4).
b. Installation.
(1) Aline matchmarks and install gear plate (6) on flowmeter register (4) with two screws (7).
(2) Position flowmeter register (4) on flowmeter (5).
(3) Install four screws (2 and 3).
(4) Install safety wire (1) on two screws (2).
c. Follow-on Maintenance. Install flowmeter register knob (TM 9-2320-279-20).
END OF TASK
22-32
