TM 9-2320-279-34-2-3
(34)
(35)
(36)
Install two pipe plugs (31) in
intermediate housing (8).
Install two coupling covers (32) on
intermediate housing (8) with four
screws (331, lockwashers (34), and
washers (35).
Install support flange (36) on
intermediate housing (8) with four
screws (37), lockwashers (38),
and nuts (39). Tighten nuts to
18 lb-ft (24 N-m).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
There are two models of primary pump. Model A does not include discharge elbow
and suction flange. If repairing Model B pump, discharge elbow and suction flange
must be installed. Do steps (37) through (40) for Model B only.
(37)
Apply silicone adhesive-sealant and install gasket (40) on volute casing (2).
(38)
Install suction flange (41) with four nuts (42). Tighten nuts to 34 lb-ft (46 Nom).
(39)
Apply silicone adhesive-sealant and install gasket (43) on volute casing (2).
(40)
Install discharge elbow (44) with four nuts (45). Tighten nuts to 34 lb-ft (46 Nom).
M978 Tanker Maintenance Procedures Instructions (Cont)
d. Follow-on Maintenance. None.
END OF TASK
Change 3
22-24.1/(22-24.2 blank)
