TM 9-2320-279-34-3
Power Takeoff (PTO) and Hydraulic Pump Maintenance Instructions (Cont)
19-2.1.
POWER TAKEOFF REPAIR (M984E1) (CONT).
NOTE
Mark pump housing assembly and PTO for installation.
(6) Remove four screws (14), pump housing
assembly (15), and gasket (16) from PTO (3).
(7) Remove oil seal (17).
NOTE
Mark closed-end bearing cover and PTO
housing for installation.
(8)
Remove four screws (18), closed-end
bearing cover (19) gasket (20) and
output shaft assembly (21) from PTO (3).
(9) Remove closed-end bearing cover (19)
from output shaft assembly (21).
(10) Remove retaining ring (22) and washer (23) from
closed-end bearing cover (19).
(11) Remove seal (24).
19-12.2
