TM 9-2320-279-34-3
Power Takeoff (PTO) and Hydraulic Pump Maintenance Instructions (Cont)
19-2.
POWER TAKEOFF (PTO) REPAIR (CONT).
(28) Install screw (46).
NOTE
There are two models of power takeoff
(PTO) units. Model B has no cover plate.
Skip steps (29) and (30) for Model B.
END OF TASK
(29)
Apply silicone adhesive-sealant to
threads of four screws (47) and
install gasket (48) and cover plate
(49) with four screws to power
takeoff (PTO) housing (7).
(30)
Tighten screws (47) to 15 to 20 lb-ft
(20 to 27 N•m)
d. Follow-on Maintenance. None
19-2.1
POWER TAKEOFF REPAIR (M984E1).
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
M984E1
Personnel Required
MOS 63W, Wheel vehicle repairer
Test Equipment
None
References
None
Special Tools
None
Supplies
Equipment Condition
TM or Para
Condition
Description
Power takeoff on a clean
work surface.
Oil, lubricating, Item 46, Appendix C
Solvent, drycleaning, Item 57, Appendix C
Compound, sealing, pipe thread, Item 29,
Special Environmental Conditions
None
Appendix C
Grease, automotive and artillery, Item 34,
Appendix C
Sealing and thread locking compound,
Item 25, Appendix C
General Safety Instructions
None
Level of Maintenance
General Support
19-12 Change 3
