TM 9-2320-279-34-3
Power Takeoff (PTO) and Hydraulic Pump Maintenance Instructions (Cont)
19-2. POWER TAKEOFF (PTO) REPAIR (CONT).
(22)
(23)
(24)
Press idler shaft (40) from power
takeoff (PTO) housing (4).
Remove two thin thrust races (41),
two thrust bearings (42), two thick
thrust races (43), and input
gear (44) from power takeoff (PTO)
housing (4).
Remove two roller assemblies (45)
and bearing spacer (46) from input
gear (44).
b. Cleaning/lnspection.
W A R N I N G
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(1) Clean all parts in dry cleaning
solvent.
(2) Inspect parts for damage. Replace damaged parts.
(3) Coat all parts with lubricating oil.
c. Assembly.
(1) Install bearing spacer (1) and two roller assemblies (2)
into input gear (3).
19-6
